- Installs
- —
- Apple does not publish download counts
- Rating
- 4.71
- Ratings
- 42
- 42 reviews
- Version
- 1.52
- Updated 29 Apr 2026
- Released
- 26 Jun 2020
- Tracked since 10 May 2026
- Size
- 26 MB
- Needs 13
Screenshots
About NuRack Auv3 FX Processor
The description on the store listing
NuRack is an AUv3 based multi-channel audio and MIDI effects processor with a difference, it actually allows you to design your own custom effects using the 80+ building blocks provided. You have full control over routing which allows you to create complex audio paths in series or parallel. You can choose whether to use the stock interface or create your own custom interface using the built in Interface Builder which allows you to concentrate your audio components into a single customized effect.
NuRack can run in one of two modes. The first providing 3 customizable effects racks which can be switched (manually or via MIDI), providing seemless switching (i.e. delay trails linger whilst …
Read the full description
NuRack is an AUv3 based multi-channel audio and MIDI effects processor with a difference, it actually allows you to design your own custom effects using the 80+ building blocks provided. You have full control over routing which allows you to create complex audio paths in series or parallel. You can choose whether to use the stock interface or create your own custom interface using the built in Interface Builder which allows you to concentrate your audio components into a single customized effect. NuRack can run in one of two modes. The first providing 3 customizable effects racks which can be switched (manually or via MIDI), providing seemless switching (i.e. delay trails linger whilst another set of effects are faded in). The second mode allows you to route audio through 3 independent audio racks. A generaous number of over 80 audio and midi building blocks are provided covering 12 different categories of effects. Here are just some of those included in NuRack: Modulation Effects: Chorus, Flanger, Phaser, Tremolo, Vocal Doubler, TalkBox, UniVibe, Leslie & Vocoder. Time Based Effects: Stereo Delay, Tape Delay, Reverb and Reverse Delay. Spectral Effects: Parametric EQ, Graphic EQ, PitchShift, Auto-Pan, Bit-Crusher, Tube Overdrive, Distortion, Harmony, Harmonic Exciter and SlowMo. Dynamic Effects: VelocityControl, Compressor, Multi-Band Compressor, Noise Gate, Gate, and Limiter. Filter Effects: MultiFilter, LP/HP Filter, Frequency Splitter, MultiBand Splitter, Classic Filters, Formant Filter, Ring Modulation and Shelf Filter. MIDI Effects: MIDI Harmony, MIDI Velocity, MIDI Randomizer, MIDI Monitor, MIDI Mixer, MIDI Pads, MIDI Control, Strummer, MIDI Recorder, MIDI Modulation, MIDI Remap, CC Monitor, CC Generator, PitchBend, MIDI Time Clock, and ChordToMidi. Generator Modules: Noise, Audio Clip Launcher, SoundFont Player, Virtual Flute, Virtual Clarinet, Virtual Brass, FM Organ, FM Rhodes and Analog Sawtooth Synth. Automation: TouchPad, AutoMate, Pattern Automation, and Visual LFO. You also provide the ability to split and combine audio signal using splitters and mixer modules as well as a number of visual elements such as VU Meters, LED Meters, Scopes, Graphs etc. Some effects such as phaser and flanger are usually controlled by an LFO, but this can be detached and automated remotely. There are a number of modules that allow auomation based on direct touch (X/Y Pads), Visual LFO, Pattern Automation, MIDI input (CC data), or peak/rms level detection. These automation modules can remotely control knobs and sliders throughout your rack. Simply create a new rack and start adding modules to it. These modules are generally wired up automatically but these connections can be manually routed. Once you have your sound as you wish you can use it 'as is', or switch to Interface Builder mode where you can combine all your modules into a single interface. Elements can be dragged, dropped, resized and coloured as required. Add your own labels, image logos and custom backgrounds before saving your custom component. Use the X/Y Pad to control your modulation effects by detaching their LFO's. Use MIDI CC data to automate knobs. Use the velocity of an incoming signal to control the cutoff/resonance of a filter (wah) or volume level of a gain control (swell), as NuRack expands, so do the possibilities. Features: ○ Over 80 categorised modules. ○ 3 Input / Output busses supported. ○ Audio & MIDI effect. ○ Lots of audio & MIDI automation options. ○ Seemless transition between racks. ○ Manual audio path routing. ○ Open in presentation mode (auto hides controls). ○ Interface Builder to customize your rack. ○ AUv3 plugin runs in MIDI and none MIDI mode. ○ Add your own Text/Heading and Image/Logos and backgrounds to your design. ○ Compatibility options for DAW's not supporting multi-channels. ○ Dark/Light Modes Checkout the YouTube channel 'Paul the MusicMan' for demos and tutorials of NuRack.
Installs
Apple does not publish download counts. Estimates are in testing.
We publish iOS estimates only after they pass a back-test against real numbers. Chart history below is measured.
Estimated store revenue Estimated Beta
App Store, worldwide, monthly rate from the last 12 chart days to 19 Nov 2026
Below the top 100 grossing apps in the markets we calibrate. In the United States that usually means under about $6.4M a month. App Store purchases and subscriptions only, before Apple's 15 to 30% fee. Ads and web payments are not included.
Ratings
42 ratings, 42 reviews
No rating breakdown published for this app.
Recent reviews
Latest public reviews from the store
No reviews in our sample for this app yet.
Top chart positions
Latest App Store chart ranks by country, last 10 days
- Countries ranked
- 1 of 50
- Best rank
- #31
- Top 10 placements
- 0
- of 1 chart placements
- Average rank
- #31
Best countries on App Store
- 🇨🇦 Canada · Top paid, Music#31
| Country | Chart | Category | Rank | Best (10 days) | Date |
|---|---|---|---|---|---|
| 🇨🇦 Canada | Top paid | Music | #31 | #31 | 19 Nov 2026 |
NuRack Auv3 FX Processor history
Release, install milestones, listing and store changes
- First released on the store 26 Jun 2020
Update frequency
How often NuRack Auv3 FX Processor ships a new version, month by month
1 updates in the last 12 months. More often than most similar apps: they shipped a median of 0 updates in the same year.
Recent versions
Current version 1.52
- Version 1.5229 Apr 2026
1.52 B74 Added a fix to prevent a crash when switching to Interfave Builder mode (with certain modules like strummer). The issue was caused by a function that silently failed in previous versions of iOS.
Listing keywords
Words and phrases NuRack Auv3 FX Processor repeats most in its store listing
Top phrases: interface builder (3), audio and midi (2), audio midi (2), building blocks (2), cc data (2).
Highlighted words also appear in the title. Counts cover the title, short description and description.
Compliance
What the listing and the app package show
- Store status
- Live
- Upkeep
- Updated 29 Apr 2026
- Age rating
- 4+
Apps like NuRack Auv3 FX Processor
SynthMaster PlayerKV331 Audio★ 4.36
Backroads & Beyond RadioJordan Boudreaux★ 4.82
Q Country 107.1 - WSAQLiggett Communications★ 4.8
Del Rio's Latino MixPaul Lomas★ 4.98
Classical Music+Cedric Porter★ 4.67
Antenne NiedersachsenDigital Media Hub GmbH★ 4.56
Jam: Instant Song CreatorDreamWalk Mobile★ 3.73
Reverse Singing Fun ChallengeNGUYEN QUY SON★ 4.51
Radio UK: Live FM & DAB OnlineRoman Skripchak★ 4.73
NuRack Auv3 FX Processor: questions and answers
Who makes NuRack Auv3 FX Processor?
NuRack Auv3 FX Processor is published by 4Pockets.com.
When was NuRack Auv3 FX Processor last updated?
The latest version (1.52) was released on 29 Apr 2026.
Is NuRack Auv3 FX Processor free?
No. NuRack Auv3 FX Processor is a paid app priced at $12.99.
Is NuRack Auv3 FX Processor still available?
Yes. NuRack Auv3 FX Processor is live on App Store as of 1 Jul 2026.
Track NuRack Auv3 FX Processor and its competitors
Watch any app for new versions, rating drops, chart moves and removals. Free plan, no card.