Skip to content
New: the free AppMetis browser extension puts measured installs and chart places on every Google Play and App Store page →
AppMetis
Google PlayFreeIn-app purchasesContains ads

Conduria: Conduit Bending Calc

Conduit offset, saddle & 90° marks to 1/16" and which bender mark to line up

Installs
6
Measured
Rating
—
Ratings
—
Version
Varies with device
Released
19 Oct 2026
Tracked since 10 Nov 2026
Size
—

Screenshots

Conduria: Conduit Bending Calc screenshot 1Conduria: Conduit Bending Calc screenshot 2Conduria: Conduit Bending Calc screenshot 3Conduria: Conduit Bending Calc screenshot 4Conduria: Conduit Bending Calc screenshot 5Conduria: Conduit Bending Calc screenshot 6Conduria: Conduit Bending Calc screenshot 7Conduria: Conduit Bending Calc screenshot 8

About Conduria: Conduit Bending Calc

The description on the store listing

Conduria is a conduit bending calculator for electricians who bend EMT, IMC, rigid and PVC conduit by hand. Enter the rise, the angle and the distance to the obstacle, and it shows where to put each mark, measured from the conduit end to the nearest 1/16 inch (or in mm), and which mark on your bender to line it up with: the arrow, the star or the saddle notch. Example: a 4" offset at 30° on 1/2" EMT, with the obstacle 36" from the end, gives marks at 29 1/16" and 37 1/16", 8" apart, with 1 1/16" of shrink (exact trigonometry; 1" with the shop multipliers). BENDS • 90° stub-up and back-to-back 90° • Offset, and the offset angle from the spacing between bends • Rolling offset: true …

Read the full description

Conduria is a conduit bending calculator for electricians who bend EMT, IMC, rigid and PVC conduit by hand. Enter the rise, the angle and the distance to the obstacle, and it shows where to put each mark, measured from the conduit end to the nearest 1/16 inch (or in mm), and which mark on your bender to line it up with: the arrow, the star or the saddle notch. Example: a 4" offset at 30° on 1/2" EMT, with the obstacle 36" from the end, gives marks at 29 1/16" and 37 1/16", 8" apart, with 1 1/16" of shrink (exact trigonometry; 1" with the shop multipliers). BENDS • 90° stub-up and back-to-back 90° • Offset, and the offset angle from the spacing between bends • Rolling offset: true offset, travel and how far to rotate the bender • 3-point and 4-point saddles • Kick: angle and travel • Parallel offsets for conduits side by side • Segmented bends: degrees per shot, shot spacing, developed length • Concentric bends: radius and marks per conduit • Total degrees, with what is left before 360° between pull points YOUR CONDUIT, YOUR BENDER • EMT, IMC, rigid or PVC, trade sizes 1/2" to 4". • Pick your bender model to use the take-up or radius its maker publishes and, where published, the maker's names for its marks: Greenlee 840A to 843A, Klein Tools 51603 to 51605, IDEAL 74-026, 74-047 and 74-028, Gardner Bender 960H to 962H. Or type in the numbers stamped on your bender. • Type lengths the way you write them: 3-1/2, 3.5 or 1' 6-3/4". • Exact trigonometry or the shop multipliers. CHECKED BEFORE YOU BEND • Fit check: every bend is checked against the conduit end and the next bend; add the stick length to check the far end. A bend that needs more room turns red and shows the space it needs. • To-scale drawing of the stick with every mark. • Bends past 360° between pull points are flagged. BUILT FOR THE JOB SITE • Large numbers; the marks stay pinned at the top as you type. • Copy a result to send to the crew. • Light and dark themes that follow your phone. • Tap sounds and vibration, each with an off switch. • Works offline. No account, no sign-up. • Phones and tablets, in 19 languages. FREE AND PRO Every calculation is free, with no usage limits. The free version shows a small banner ad at the bottom. The bend sheet collects several bends with their marks in one list; the free sheet holds 3 bends. Pro, a one-time purchase, adds: • Unlimited bends on the bend sheet • Saved jobs to reopen later • The bend sheet as a PDF to print or share, with each stick drawn • No ads FAQ How do I find the marks for a conduit offset? Choose Offset and enter the rise, the angle and the distance to the obstacle. Conduria shows both marks from the conduit end, the distance between them and the shrink. What is the take-up on a 1/2" EMT bender? Most 1/2" EMT hand benders use 5"; 3/4" EMT 6", 1" EMT 8", 1-1/4" EMT 11". The number stamped on your bender comes first. Which mark on the bender do I line up with? The arrow for a stub-up, an offset and a 4-point saddle; the star for a back-to-back; the notch for the center of a 3-point saddle. Conduria names the right one next to each mark. What multiplier do I use for a 30° offset? 2.0, with 1/4" of shrink per inch of rise. 10° is 6.0, 22.5° is 2.6, 45° is 1.4, 60° is 1.2. How many degrees are allowed between pull points? 360° in total. Total degrees adds up your bends. LIMITATIONS • Results are estimates. Take-up, gain and radius vary by maker and model, so the values stamped on your bender and the maker's chart come first. Follow the electrical code for your job, and make a test bend on the first piece. • Built-in bender values cover EMT 1/2" to 1-1/4" and rigid or IMC up to 1". For other sizes and PVC bending forms, enter your own take-up or radius. • For PVC, Conduria lays out the marks; heating is up to you. • Saved jobs stay on this phone. • Greenlee, Klein Tools, IDEAL and Gardner Bender are trademarks of their owners. Conduria is independent and not affiliated with them.

Installs Measured

Exact Google Play install counts, collected daily

Updated 11 d ago

Daily history starts once this app is in our daily install sample.

Full history, growth rates and exports are in AppMetis.Start free

Ratings

  • 5 ★0.0%
  • 4 ★0.0%
  • 3 ★0.0%
  • 2 ★0.0%
  • 1 ★0.0%

Recent reviews

Latest public reviews from the store

No reviews in our sample for this app yet.

Top chart positions

Latest Google Play chart ranks by country, last 10 days

Not in any tracked top chart in the last 10 days.

Conduria: Conduit Bending Calc history

Release, install milestones, listing and store changes

  1. First released on the store 19 Oct 2026

Listing keywords

Words and phrases Conduria: Conduit Bending Calc repeats most in its store listing

bender13conduit10offset10bend9bends9emt9marks9conduria6mark6between5end5angle4degrees4point4

Top phrases: between pull points (3), bend sheet (3), between pull (3), conduit end (3), pull points (3).

Highlighted words also appear in the title. Counts cover the title, short description and description.

Business model and tech

From the store listing and declared permissions

Business model
Free to downloadIn-app purchasesShows ads
Sensitive access
No sensitive permission declared

Compliance

What the listing and the app package show

Store status
Live
Privacy policy
Linked on the listing
Advertising
Shows ads
In-app purchases
Offered
Age rating
Everyone

Apps like Conduria: Conduit Bending Calc

Conduria: Conduit Bending Calc: questions and answers

How many downloads does Conduria: Conduit Bending Calc have?

Conduria: Conduit Bending Calc has 6 installs on Google Play, measured from the store's own count on 10 Nov 2026.

Who makes Conduria: Conduit Bending Calc?

Conduria: Conduit Bending Calc is published by GRAMSHIFT.

Is Conduria: Conduit Bending Calc free?

Yes. Conduria: Conduit Bending Calc is free to download and offers in-app purchases, and it shows ads.

Is Conduria: Conduit Bending Calc still available?

Yes. Conduria: Conduit Bending Calc is live on Google Play as of 10 Nov 2026.

Track Conduria: Conduit Bending Calc and its competitors

Watch any app for new versions, rating drops, chart moves and removals. Free plan, no card.