- Installs
- —
- Apple does not publish download counts
- Rating
- 5.0
- Ratings
- 7
- 7 reviews
- Version
- 1.3.1
- Updated 4 Jun 2026
- Released
- 3 Mar 2026
- Tracked since 10 May 2026
- Size
- 8 MB
- Needs 18.1
About Condukt
The description on the store listing
Turn your iPhone, iPad or Mac into a customizable MIDI controller. Plug in your synth, pick parameters by name, and start playing in seconds.
Condukt connects to any class-compliant USB MIDI device. No adapters. No manual CC programming. Just plug in and go.
▸ PLUG AND PLAY
Connect your synth via USB-C. Condukt recognizes it instantly. Pick parameters from a list, filter cutoff, oscillator pitch, envelope attack, and you're controlling it. No more digging through manuals for CC numbers.
▸ POWERED BY midi.guide
Condukt uses the midi.guide open-source database with MIDI definitions for hundreds of synths, drum machines, and effects. Community-maintained and constantly growing.
▸ BUILD …
Read the full description
Turn your iPhone, iPad or Mac into a customizable MIDI controller. Plug in your synth, pick parameters by name, and start playing in seconds. Condukt connects to any class-compliant USB MIDI device. No adapters. No manual CC programming. Just plug in and go. ▸ PLUG AND PLAY Connect your synth via USB-C. Condukt recognizes it instantly. Pick parameters from a list, filter cutoff, oscillator pitch, envelope attack, and you're controlling it. No more digging through manuals for CC numbers. ▸ POWERED BY midi.guide Condukt uses the midi.guide open-source database with MIDI definitions for hundreds of synths, drum machines, and effects. Community-maintained and constantly growing. ▸ BUILD YOUR OWN BOARDS Create custom control surfaces tailored to your workflow. Sequencers, faders, crossfaders, recall buttons: arrange them however you want. Save multiple boards for different setups. ▸ DO WHAT YOUR HARDWARE CAN'T - Add multiple LFOs to synths that only have one - Control the same parameter across multiple tracks with a single fader - Instant snapshot recall for live performance - Sophisticated generative sequencers ▸ MULTI-DEVICE CONTROL One board can control multiple synths simultaneously. A single "Filter" fader can adjust cutoff on your Minifreak, Digitakt, and Moog at the same time. ▸ PERFORMANCE LAYOUTS Switch between layouts on the fly. Page 1 for sound design. Page 2 for performance. Page 3 for mixing. All within the same board. ▸ SNAPSHOT RECALL Store and recall control settings instantly. Tap and hold to save. Quick tap to restore. Perfect for live sets. Add crossfaders and morph between saved scenes. ▸ FULLY THEMEABLE Condukt looks as good as it works. Custom themes make your controller visually distinctive, whether you're performing on stage or filming content. ▸ WORKS WITH Elektron (Digitakt, Syntakt, Octatrack, Analog Four, Model:Cycles, Model:Samples), Arturia (Minifreak, Microfreak, MiniBrute), Moog (Subharmonicon, DFAM, Mother-32, Matriarch), Teenage Engineering, Novation, Korg, Roland, Sequential, and hundreds more. ▸ MADE FOR MUSICIANS Built by synthheads for synthheads. We've been working on this project for 5+ years, and Condukt is the app we always wanted. No subscriptions. No account required. Just plug in and play.
Installs
Apple does not publish download counts. Estimates are in testing.
We publish iOS estimates only after they pass a back-test against real numbers. Chart history below is measured.
Estimated store revenue Estimated Beta
App Store, worldwide, monthly rate from the last 12 chart days to 19 Nov 2026
Below the top 100 grossing apps in the markets we calibrate. In the United States that usually means under about $6.4M a month. App Store purchases and subscriptions only, before Apple's 15 to 30% fee. Ads and web payments are not included.
Ratings
7 ratings, 7 reviews
No rating breakdown published for this app.
Recent reviews
Latest public reviews from the store
No reviews in our sample for this app yet.
Top chart positions
Latest App Store chart ranks by country, last 10 days
Not in any tracked top chart in the last 10 days.
Condukt history
Release, install milestones, listing and store changes
- First released on the store 3 Mar 2026
Update frequency
How often Condukt ships a new version, month by month
3 updates in the last 12 months. More often than most similar apps: they shipped a median of 1 updates in the same year.
Recent versions
Current version 1.3.1
- Version 1.3.14 Jun 2026
Condukt 1.3 is the biggest update since launch: a community of boards to pull from, a looper that captures your playing and exports it as MIDI, a synth inside the app, an envelope editor that reaches into all your hardware, and a much better iPhone layout. COMMUNITY: BOARDS BUILT BY OTHER CONDUKTERS The new Community tab is a catalog of boards made by people who use Condukt, ready to install with one tap. See a board built for the synth in front of you? Tap it, install it, and start playing. Every board remembers which synths it controls, so build a Microfreak board you love, share it, and every other Microfreak owner benefits. Boards group into per-manufacturer sections (ELEKTRON, KORG, MOOG, etc) so it's easy to browse by the gear you own. This feature is yours to shape. THE RECORDER: A LOOPER THAT CAPTURES EVERYTHING A beat-synced tape looper that captures gestures and notes from anywhere on your board, plays them back in a loop, and exports the take as a MIDI file. Wire it to a Fader, XY Pad, Crossfader, sequencer, or the new MIDI Notes Input, set a tape length, and hit REC. It captures everything routable, and each note replays on the channel it was captured on. Export any tape as a standard MIDI file you can drop into your DAW, and recordings save with the board so a take comes back exactly as you left it. MIDI NOTES INPUT: BRING IN YOUR KEYBOARD A new source control that listens to incoming MIDI notes and lights up a grid as you play. Route it into the Recorder and a performance on your external keyboard gets captured straight to tape. CONDUKT POLY: A SYNTH INSIDE THE APP Condukt has always controlled your hardware. Now it makes sound of its own. Condukt Poly is the first in-app synth: an 8-voice subtractive instrument with two oscillators, noise, a Moog-style ladder filter, a dedicated filter envelope, and glide. Its parameters route into faders, sequencers, and the Recorder exactly like a hardware synth. A patch editor gives you interactive ADSR envelopes, five factory presets, and Save As. Each channel running Poly gets its own audio instance, so two Polys play side by side. It's a great way to sketch an idea or learn the app without anything plugged in. ENVELOPES: EDIT THE SHAPE OF ANY SOUND Condukt 1.3 scans your connected synths and finds their envelopes automatically, surfacing them as interactive curve editors. We found some 553 envelopes across 210 devices! Instead of hunting for attack and decay CCs, you grab the curve and shape it. The editor stays bound to the underlying CCs, so a fader or LFO on the same parameter stays in sync. A THIRD AXIS FOR THE XY PAD On iPad with an Apple Pencil, the XY Pad now captures pressure as a third axis. Press harder and Condukt records a Z value alongside X and Y, routable like any other source. Send it to velocity and your gesture's pressure shapes how hard each note hits. The XY Pad recorder can also replay finger gestures up to 100x slower, for great ambient build-ups. A MUCH BETTER IPHONE Lots of work to make Condukt feel right on a phone. Board zoom now goes below 1x (0.25x, 0.5x, 0.75x) so you can see more of the grid at once, and zoom saves per board. Horizontal swipes use velocity tiers: a nudge steps one column, a short swipe jumps a viewport, a long flick drifts freely. Controls you add now stack into visible grid slots instead of landing off screen, and multi-channel instrument tiles read better with channel badges. EVERYTHING ELSE - Custom MIDI definitions: point an instrument at your own MIDI.guide-format CSV to rename parameters or define a device that isn't in the database yet - Audio routing follows your gear: plug in an interface or headphones mid-session and the engine follows - Sharper everywhere: crisper board thumbnails, higher-quality icons, smoother scrolling through big rigs - Plus a long list of smaller fixes and refinements throughout If you build a board you're proud of, share it. We can't wait to see what shows up in the catalog.
- Version 1.31 Jun 2026
Condukt 1.3 is the biggest update since launch: a community of boards to pull from, a looper that captures your playing and exports it as MIDI, a synth inside the app, an envelope editor that reaches into all your hardware, and a much better iPhone layout. COMMUNITY: BOARDS BUILT BY OTHER CONDUKTERS The new Community tab is a catalog of boards made by people who use Condukt, ready to install with one tap. See a board built for the synth in front of you? Tap it, install it, and start playing. Every board remembers which synths it controls, so build a Microfreak board you love, share it, and every other Microfreak owner benefits. Boards group into per-manufacturer sections (ELEKTRON, KORG, MOOG, etc) so it's easy to browse by the gear you own. This feature is yours to shape. THE RECORDER: A LOOPER THAT CAPTURES EVERYTHING A beat-synced tape looper that captures gestures and notes from anywhere on your board, plays them back in a loop, and exports the take as a MIDI file. Wire it to a Fader, XY Pad, Crossfader, sequencer, or the new MIDI Notes Input, set a tape length, and hit REC. It captures everything routable, and each note replays on the channel it was captured on. Export any tape as a standard MIDI file you can drop into your DAW, and recordings save with the board so a take comes back exactly as you left it. MIDI NOTES INPUT: BRING IN YOUR KEYBOARD A new source control that listens to incoming MIDI notes and lights up a grid as you play. Route it into the Recorder and a performance on your external keyboard gets captured straight to tape. CONDUKT POLY: A SYNTH INSIDE THE APP Condukt has always controlled your hardware. Now it makes sound of its own. Condukt Poly is the first in-app synth: an 8-voice subtractive instrument with two oscillators, noise, a Moog-style ladder filter, a dedicated filter envelope, and glide. Its parameters route into faders, sequencers, and the Recorder exactly like a hardware synth. A patch editor gives you interactive ADSR envelopes, five factory presets, and Save As. Each channel running Poly gets its own audio instance, so two Polys play side by side. It's a great way to sketch an idea or learn the app without anything plugged in. ENVELOPES: EDIT THE SHAPE OF ANY SOUND Condukt 1.3 scans your connected synths and finds their envelopes automatically, surfacing them as interactive curve editors. We found some 553 envelopes across 210 devices! Instead of hunting for attack and decay CCs, you grab the curve and shape it. The editor stays bound to the underlying CCs, so a fader or LFO on the same parameter stays in sync. A THIRD AXIS FOR THE XY PAD On iPad with an Apple Pencil, the XY Pad now captures pressure as a third axis. Press harder and Condukt records a Z value alongside X and Y, routable like any other source. Send it to velocity and your gesture's pressure shapes how hard each note hits. The XY Pad recorder can also replay finger gestures up to 100x slower, for great ambient build-ups. A MUCH BETTER IPHONE Lots of work to make Condukt feel right on a phone. Board zoom now goes below 1x (0.25x, 0.5x, 0.75x) so you can see more of the grid at once, and zoom saves per board. Horizontal swipes use velocity tiers: a nudge steps one column, a short swipe jumps a viewport, a long flick drifts freely. Controls you add now stack into visible grid slots instead of landing off screen, and multi-channel instrument tiles read better with channel badges. EVERYTHING ELSE - Custom MIDI definitions: point an instrument at your own MIDI.guide-format CSV to rename parameters or define a device that isn't in the database yet - Audio routing follows your gear: plug in an interface or headphones mid-session and the engine follows - Sharper everywhere: crisper board thumbnails, higher-quality icons, smoother scrolling through big rigs - Plus a long list of smaller fixes and refinements throughout If you build a board you're proud of, share it. We can't wait to see what shows up in the catalog.
- Version 1.230 Apr 2026
A brand new Arpeggiator built to be played: two sizes, multitouch pads, four poly modes including Canon, diatonic chord voicings, scale-quantized Spread modulation, and external keyboard control with held keys mirrored into the grid. The Arp is also a patch cable target now, and LFO rates reach down to 10-minute cycles.
Listing keywords
Words and phrases Condukt repeats most in its store listing
Top phrases: midi guide (2), pick parameters (2), snapshot recall (2).
Highlighted words also appear in the title. Counts cover the title, short description and description.
Compliance
What the listing and the app package show
- Store status
- Live
- Upkeep
- Updated 4 Jun 2026
- Age rating
- 4+
Apps like Condukt
Pyware 3D ViewerPygraphics, Inc.★ 2.86
WNGC Your Georgia CountryCox Media Group★ 4.54
Rhythm Necklace - Geometric SequencerSam Tarakajian★ 4.64
DigiStix 2 AUv3 Plugin4Pockets.com★ 4.54
JPLAYMarcin Ostapowicz★ 4.3
MS Vinyl - Music WidgetDinh Dong Nguyen★ 4.26
Radio TEDDYIR MediaAd GmbH★ 4.56
Arpeggionome Pro | matrix arpeggiatorAlexandernaut★ 4.56
Guitar & Ukulele Tuner 2025Aleksandr Kulaga★ 4.44
Condukt: questions and answers
Who makes Condukt?
Condukt is published by Pencil Research.
When was Condukt last updated?
The latest version (1.3.1) was released on 4 Jun 2026.
Is Condukt free?
Yes. Condukt is free to download.
Is Condukt still available?
Yes. Condukt is live on App Store as of 1 Jul 2026.
Track Condukt and its competitors
Watch any app for new versions, rating drops, chart moves and removals. Free plan, no card.